Ethylenglicol / Diethylenglicol
ETHYLENGLYCOL
Monoethylenglycol (GOST 19710-83)
Ethylenglycol (HO-CH2CH2-OH)used for the production of synthetic fibre, resins, low-freezing temperature and hydraulic fluids, also cosmetics. Molecular mass - 62,07.
Technical grades characteristics:
|
Parameter |
Standard |
|||
|
Highest grade OKP 24 2212 0120 |
1 grade OKP 2 2212 0130 |
|||
|
1 |
Ethylenglycol mass fraction, %, no less than |
99,8 |
98,5 |
|
|
2 |
Diethylenglycol mass fraction, %, no more than |
0,05 |
1,0 |
|
|
3 |
Colour, Hazen units, in ordinary condition after boiling with hydrochloric acid. |
5 20 |
20 non-standardized |
|
|
4 |
Remainder mass fraction after conditioning , %, no more than |
0,001 |
0,002 |
|
|
5 |
Iron (Fe) mass fraction, %, no more than |
0,00001 |
0,0005 |
|
|
6 |
Water mass fraction, % no more than |
0,1 |
0,5 |
|
|
7 |
Acid mass fraction, converted into acetic acid, %, no more than |
0,0006 |
0,005 |
|
|
8 |
Fracture parameter at 20 oC |
1,431-1,432 |
1,430-1,432 |
|
|
9 |
Pass in the UV spectral range , %, no less than, at wave length ,nm |
220 275 350 |
75 95 100 |
Non-standardized |
Transportation
Ethylenglycol is transported in 50 t volume railway tanks with aluminium boilers or corrosion-resistant steel boilers, aluminium or corrosion resistant steel barrels.
DIETHYLENGLYCOL
GOST 10136-77
Diethylenglycol (HO-CH2-CH2-O-CH2-CH2-OH) is used in the organic synthesis industry, production of popiurethane, brand B – for natural gas drying and extraction of aromatic substances. Molecular mass - 106,12.
Technical characteristics:
|
Parameter |
Standard |
||||
|
Brand A O P 24 2213 0100 |
Brand B OKP 24 2213 0200 |
||||
| Density at 20 oC, g/cm3 |
1,116-1,117 |
1,116-1,117 |
|||
| Diethylenglycol mass fraction, %, no less than |
99,5 |
98,0 |
|||
| Organic admixture mass fraction, %, no more than; including ethylenglycol, %, no more than |
0,4-0,15 |
1,8-1,0 |
|||
| Colour, Hazen units, no more than |
10 |
20 |
|||
| Water mass fraction, %, no more than |
0,05 |
0,2 |
|||
| Acid mass fraction converted into acetic acid , %, no more than |
0,005 |
0,01 |
|||
| Saponification number, mg KON into 1 g product , no more than |
0,1 |
0,3 |
|||
| Distillation temperature range at pressure 101,3 hPa (760 mm g. st.) Start of distillation, oC, not lower end of distillation , oC, not higher |
244-249 |
241-250 |
|||
Transportation
Diethylenglycol is transported in railway tanks with a volume of 50 t aluminium or corrosion-resistant steel boilers, aluminium barrels or corrosion-resistant steel barrels with a volume of 110 - 275 dm3.
